|
|
|
Venture 360 Wing
Our Venture Wing has always been a donut-style wing and now with a new line of donut wings launching, we decided to rename it to reflect its design. Ideal for diving heavier single tanks with a hard back plate, the Venture Wing has 45 pounds/20 kgs of lift and can accommodate up to one 95 ft3/15 L single tank or is often used with rebreathers. The trapezoid-shape gives divers lift around the hips where it is needed to achieve horizontal trim underwater. Streamlined side panels expand to maximize lift capacity, yet keep a sleek, trim profile reducing drag in the water. Tough, ballistic nylon outer bag protects the wing from tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical resistant and resists the growth of microorganisms. Choose from several different lengths of exhaust hose and low pressure inflation hose length (call us for details). Optional RiteSource integrated Octo.
|
|
|
|
|
|
|
Travel 360 Wing
The Travel Wing returns to its former 30lbs/14kg of lift, yet retains its longer center panel in order to accommodate metal backplates.
The Travel Wing is a popular choice among warm water divers looking for a compact single tank wing that is lightweight and easy to pack for travel. The donut-style shape provides an even volume of inflation, keeping single tank divers steady and trim underwater.
Tough, cordura nylon outer bag protects the wing from tears and abrasion. Choose from several different lengths of exhaust hose and low pressure inflation hose length (see tech specs). Optional RiteSource integrated octo. The Travel 360 Wing has 30 lbs/14 kg of lift and can accommodate one 95 ft3/15L back mounted cylinder. The Travel 360 Wing is designed for use with the TransPac, Transplate or any webbing-style harness. Made in the U.S.A.
|
|
|
|
|
|
|
Dive-Rite TransPac Harness
Designed like a mountaineers backpack, the TransPac disperses weight across the hips and back, minimizing shoulder strain. Adjustable straps adapt to a wide variety of exposure suits. A soft backplate accommodates sidemount diving, yet gives appropriate support for single tanks, double tanks or rebreathers. Slots in the backplate fit standard 36-inch cam straps (included) for single tank diving. The modular design allows for customization using an assortment of pockets and accessories. The TransPac is lightweight and flattens easily into a suitcase for travel. The TransPac is designed to be used with any wing in the Dive Rite line.
S,M,L,XL $365.00
XXL $375.00
|
|
|
|
|
|
|
DiveRite Classic EXP Aircell
The Classic EXP is divings first air cell designed specifically for use with double cylinders. They provide up to 59 pounds/27 kg of lift. They are designed for use with medium- to heavyweight doubles (Classic Wings should not be used with single cylinders). These wings can accommodate up to two 104-cubic-foot/16 litre back-mounted cylinders, and one 80-cubic-foot/11 litre stage bottle. A 22-inch/56cm low-pressure inflator hose is standard. Classic Wing is popular among many hard-core cave divers, who appreciate its simple, streamlined, time-tested design. Available in Black Only.
|
|
|
|
|
|
|
Oxy Cheq Mach V 18# Wing
Signature Series Wing for Singles. The extremely low profile produces less drag in the water. The Mach V has integrated role control devices eliminating the need for a single tank adaptor. Inflator hose elbow is off center so it will not interfere with the first stage regulator. Complete with roll control so you will not have to use an STA (Single Tank Adaptor) with a OxyCheq backplate. Easy access to bladder via a 360 degree zipper.
The 18 pound is the lowest profile travel wing available.
Design: 360
Outer Shell: Cordura
Inner Bladder: 26.5 Mil (thicker than water bed)
Lift: 18 Pound / 8.2 Kilograms
|
|
|
|
|
|
|
55# Vertex Signature Series
Vertex Signature Series for Doubles. Inner Bladder/Single Inflator Wing in 360 degree design. Very streamlined providing for less drag and less energy expended when swimming. This 360 design allows for better trim and buoyancy characteristics than the older horseshoe designs. The 42 Pound version is great for small doubles or rebreathers and the 30 Pound is designed for rebreathers. Having both inflator elbows on the rear of the wings keeps the one elbow from digging into the rear of the divers shoulder and allows easier access to the back up inflator hose.
Design: 360 Degree
Outer Shell: Cordura
Inner Bladder: 25 Mil
Lift: 55 Pounds / 25 Kilograms or 42 Pounds / 19 kilograms or 30 Pounds / 13.6
Item: ROW-04-55 (55 Pounds / 25 Kilograms)
|
|
|
|
|
|
|
Nomad
The original, this Nomad is a true explorer's kit, complete with tank hardware necessary to side mount tanks. And, with lift increased to 60lbs/27kg, divers can wear a wetsuit and high volume steel tanks with confidence. Streamlining is achieved by integrating the TransPac® harness through wing keepers that hold the wing low across the back to reduce drag. Proper trim comes from the longer wing and a Gusset Control System (GCS) cord that is woven through tabs on the front face of the wing. The GCS cord is positioned on the upper portion of the wing, forcing the lower part of the wing to inflate preferentially, keeping lift around the divers hips where it is needed. Utilizing the TransPac® harness, tanks are attached with a bungee and butt plate system that allows the tanks to ride closely at the diver's side, yet not be jammed under the arms, as this can "A-framing" when backing out of tight restrictions. A standard 2-inch crotch strap is included. Made in the U.S.A. CE EN250 Approved.
|
|
|
|
|
|
|
DiveRite Basic Harness
This style include shoulder and waist D-rings (shoulder D-rings are bent at a slight angle for better access). The Standard webbing harness is made from a single piece of continuous webbing.
|
|
|
|
|
|
|
DiveRite Deluxe Harness
This style include shoulder and waist D-rings (shoulder D-rings are bent at a slight angle for better access). The Deluxe harness incorporates a built-in cross-chest strap, plus shoulder-strap pivot rings that further increase comfort.
|
|
|
|
|
|
|
Rigid D-Rings
These 2-inch rigid D-rings are welded to belt slides and remain in a fixed, raised position. They are helpful when used in a position where the diver cannot see the connection, such as far back on the waist belt. Available as a perpendicular rigid D-ring (used primarily on the waist belt) or 45-degree bend (used primarily on shoulder harnesses). Made of marine grade 316 stainless steel and designed for saltwater use.
|
|
|
|
|
|
|
DiveRite Aluminum BackPlate
The Aluminum Back Plate incorporate several features including tank cam band slots, doubles mounting slot, mounting slot for 1" or 2" crotch strap, perimeter mounting holes, and a highly polished finish. Perfect for the diver who loves simplicity with a wide range of accessory mounting options. The doubles mounting slot allows easy assembly onto different double tank configurations without bolt line up concerns.
|
|
|
|
|
|
|
DiveRite Stainless Steel BackPlate
The Stainless Steel Back Plate incorporate several features including tank cam band slots, doubles mounting slot, mounting slot for 1" or 2" crotch strap, perimeter mounting holes, and a highly polished finish. Perfect for the diver who loves simplicity with a wide range of accessory mounting options. The doubles mounting slot allows easy assembly onto different double tank configurations without bolt line up concerns.
|
|
|
|
|
|
|
Corrugated Hoses
Divers who wear double back mounted tanks often prefer hoses with a low profile elbow that doesn't interfere with a regulator connection to the tank manifold. Many times, coldwater divers desire the longer 16-inch hose to reach past bulky exposure protection. Warm water divers frequently select the shorter 12-inch hose, unless they are large in stature. Recreational divers can benefit from the 16-inch rapid exhaust hose with convenient "pull dump" as well as conventional overhead exhaust. Made in the U.S.A.
|
|
|
|
|
|
|
Assembly Screw
The stainless steel assembly screws are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems and sidemount buttplates). Another common use is to secure the wing to the TransPac harness or hard backplate when rigged for a single tank--When the BCD is taken off a single tank (perhaps to swap tanks between dives), the cam straps alone are not enough to keep the wing neatly attached to the harness. Designed to fit through a 3/8" hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place.
Sold as a set of two.
|
|
|
|
|
|
|
Singles Mounting Plate (SMP)
For divers who frequently switch between double tank and single tank rigs, our single tank adapter is a convenient way to attach cam straps to a hard metal back plate that does not have tank band slots. Constructed of marine grade 304 stainless steel.
Note: Singles Mounting Plate (SMP) does not include cam straps.
|
|
|
|
